树莓派配置

---

镜像

Ubuntu：https://ubuntu.com/download/raspberry-pi

Pi OS：https://www.raspberrypi.com/software/operating-systems

balena：https://www.balena.io/etcher

更新源

sudo vim /etc/apt/sources.list

deb http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ buster main non-free contrib rpi
deb-src http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ buster main non-free contrib rpi


sudo vim /etc/apt/sources.list.d/raspi.list
deb http://mirrors.tuna.tsinghua.edu.cn/raspberrypi/ buster main ui

修改时区

Asia => Shanghai

sudo dpkg-reconfigure tzdata

vim配置

http://sanzo.top/Default/vim

set expandtab
set softtabstop=2
set autoindent
set tabstop=2
set shiftwidth=2
set nu
syntax on

noremap H ^
noremap L $
noremap J G
noremap K gg
nnoremap < <<
nnoremap > >>

静态IP

sudo nano /etc/dhcpcd.conf

interface eth0
static ip_address=192.168.31.240/24
static routers=192.168.31.1
static domain_name_servers=192.168.31.1

interface wlan0
static ip_address=192.168.31.242/24
static routers=192.168.31.1
static domain_name_servers=192.168.31.1

sudo reboot

安装包

sudo apt install -y lrzsz git proxychains libboost-all-dev samba samba-common aria2 cmake

proxychains

sudo vim /etc/proxychains.conf 
最后一行改为对应自己的端口
# socks5    127.0.0.1 9050
socks5    127.0.0.1 10800

v2ray

v2ray下载地址安装包

config.json格式

脚本下载：

# auto install
wget https://raw.githubusercontent.com/v2fly/fhs-install-v2ray/master/install-release.sh
sudo bash install-release.sh 
# sudo bash install-release.sh --local v2ray-linux-64.zip

sudo vim /usr/local/etc/v2ray/config.json

# 启动服务
sudo systemctl enable v2ray
sudo systemctl start v2ray

安装包下载：

unzip v2ray-linux-arm64-v8a.zip

# sudo vim /usr/lib/systemd/system/v2ray.service
[Unit]
Description=V2Ray Service
Documentation=https://www.v2fly.org/
After=network.target nss-lookup.target

[Service]
User=nobody
CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
NoNewPrivileges=true
ExecStart=/home/ubuntu/software/v2ray/v2ray run -config /home/ubuntu/software/v2ray/config.json
Restart=on-failure
RestartPreventExitStatus=23

[Install]
WantedBy=multi-user.target


# 启动服务
sudo systemctl daemon-reload
sudo systemctl enable v2ray
sudo systemctl start v2ray

终端代理设置：

export ALL_PROXY="socks5://127.0.0.1:10800"
export all_proxy="socks5://127.0.0.1:10800"
export http_proxy="http://127.0.0.1:10801"
export https_proxy="https://127.0.0.1:10801"

zsh

https://sanzo.top/Linux/zsh/

git

# 设置账号信息
git config --global user.email "arrangeman@163.com"
git config --global user.name "Sanzo00"

# 生成公钥和私钥
ssh-keygen -t rsa -C "your_email@example.com"

# 将公钥放到github中
vim .ssh/id_rsa.pub 

Docker

# install
curl -fsSL get.docker.com -o get-docker.sh
sudo sh get-docker.sh --mirror Aliyun

# docker setup
sudo systemctl enable docker
sudo systemctl start docker

# add $USER to docker groups
sudo groupadd docker
sudo usermod -aG docker $USER

# test docker
docker run --rm hello-world

打印机

docker安装

# docker install
# https://yeasy.gitbook.io/docker_practice/install/raspberry-pi
docker pull tigerj/cups-airprint

docker run -d --restart=always --name=cups --net=host -v /var/run/dbus:/var/run/dbus --device /dev/bus -e CUPSADMIN="ubuntu" -e CUPSPASSWORD="ubuntu@print" tigerj/cups-airprint

手动安装

安装CUPS

# 安装CUPS
sudo proxychains apt install cups

# 修改配置文件
sudo vim /etc/cups/cupsd.conf

# 重启服务
sudo service cups restart

安装打印机驱动

# 下载安装打印机驱动
wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz

tar -xzvf foo2zjs.tar.gz

cd foo2zjs

# 安装ghostscript依赖
sudo apt install ghostscript
sudo apt install dc

# 编译
make -j10

# 安装
sudo make install

浏览器访问cups的配置页面http://192.168.31.240:631，添加对应的打印机。

记得要连接上打印机，而且要用root账号登录。

Windows添加打印机

https://192.168.31.240:631/printers/HP_LaserJet_M1005

mac：https://support.apple.com/kb/DL1888?viewlocale=en_US&locale=en_US

挂载硬盘

# 查看所用分区
sudo fdisk -l

# 修改配置文件
sudo vim /etc/fstab

# 在末尾添加
/dev/sda1 /home/pi/sanzo ntfs defaults 0 0

# 创建对应文件夹
mkdir /home/pi/sanzo

# 重新挂载
sudo mount -a

Samba

# 安装samba
sudo apt install samba samba-common

sudo vim /etc/samba/smb.conf

# 需要账号的登录文件夹	
[share]
	comment = share
	# 注意读写权限, 需要在对应位置创建文佳夹
	path = /home/pi/sanzo		
	
	# 允许游客访问
	public = no
	
	# 可查看
	browseable = yes
	
	# 允许登录的用户
	valid users = root, pi

	# 所用用户可写
	#writable = yes			

	# 允许个别用户可写
	write list = root,pi
	# 如果writable和write list同时存在，则以writable为准

# 不需要账号登录的文件夹	
[public]
	comment = public
	# 注意读写权限, 需要在对应位置创建文佳夹
	path = /home/pi/sanzo/public
	
	# 允许游客访问
	public = yes	
	
	# 可查看
	browseable = yes	
	
	# 所用用户可写
	writable = yes	

	# 允许个别用户可写
	# write list = test
	# 如果writable和write list同时存在，则以writable为准

配置用户和密码

# 创建密码文件
#sudo bash -c "cat /etc/passwd |mksmbpasswd > /etc/samba/smbpasswd"

# 启动加密口令
#sudo vim /etc/samba/smb.conf
#encrypt passwords = yes
#smb passwd file = /etc/samba/smbpasswd

# 修改密码文件的权限
#sudo chmod 600 /etc/samba/smbpasswd

# 为用户设置samba口令
sudo smbpasswd -a pi

# 重启服务
sudo service smbd restart

在我的电脑地址栏输入\192.168.31.240登录即可

清除windows下的net缓冲

# 查看
net use

# 删除对应的缓冲
net use \\192.168.31.240\share /d

若清除缓存后依然自动登录，则需要进入控制面板→用户账户→选择当前账户→管理你的凭据→Windows凭据→删除

qBittorrent

https://hub.docker.com/r/linuxserver/qbittorrent

# download image
docker pull lscr.io/linuxserver/qbittorrent:latest

# run image
docker run -d \
  --name=qbittorrent \
  -e PUID=1000 \
  -e PGID=1000 \
  -e TZ=Etc/UTC \
  -e WEBUI_PORT=18000 \
  -p 18000:18000 \
  -p 46881:46881 \
  -p 46881:46881/udp \
  -v /home/sanzo/disk/data/qbittorrent-config:/config \
  -v /home/sanzo/disk/data/private/qbittorrent:/downloads \
  --restart unless-stopped \
  lscr.io/linuxserver/qbittorrent:latest

在使用内网穿透访问局域网的qbittorrent服务时，需要取消勾选设置=>Web UI=>启动Host header属性验证。

frp内网穿透

frps

# configuration of frps
vim /root/sanzo/frp/frps.toml

[common]
bind_port = 60000
vhost_http_port = 60080
vhost_https_port = 60443
dashboard_addr = 0.0.0.0
dashboard_port = 60001
dashboard_user = YOUR_NAME
dashboard_pwd = YOUR_PASSWD
token = YOUR_TOKEN

# install image
docker pull snowdreamtech/frps

# run image
docker run --restart=always --net host -d -v /root/sanzo/frp/frps.toml:/etc/frp/frps.toml^C-name frps snowdreamtech/frps

# access frps vis this link
YOUR_IP:60001

frpc

# configuration of frpc
vim /home/sanzo/software/frpc/frpc.toml


[common]
server_addr = SERVER_IP
server_port = 60000
token = SERVER_TOKEN

http_proxy = http://127.0.0.1:7890
https_proxy = https://127.0.0.1:7890

[ssh]
type = tcp
local_ip = 127.0.0.1
local_port = 22
remote_port = SERVER_PORT

[qbt]
type = tcp
local_ip = 127.0.0.1
local_port = 18000
remote_port = SERVER_PORT

[pi-dashboard]
type = tcp
local_ip = 127.0.0.1
local_port = 80
remote_port = SERVER_PORT

# install image
docker pull snowdreamtech/frpc

# run image
docker run --restart=always --network host -d -v /home/sanzo/software/frpc/frpc.toml:/etc/frp/frpc.toml --name frpc snowdreamtech/frpc

Aria2

海盗湾：https://thepiratebay.org/index.html

1337X：https://1337x.to/

LIMETORRENTS：https://www.limetorrents.pro/

TORLOCK：https://www.torlock.com/

ZOOQLE：https://zooqle.com/

YTS：https://yts.mx/

RARBG：https://rarbg.to/

使用容器

https://hub.docker.com/r/p3terx/aria2-pro

mkdir aria2-pro && cd aria2-pro

# 下载配置文件
wget git.io/aria2-pro.yml

# 运行
docker-compose -f aria2-pro.yml up -d

手动安装

sudo apt install -y aria2 

# 创建文件夹和文件
mkdir .aria2
touch .aria2/aria2.session
vim .aria2/aria2.config

# 测试运行 
aria2c --conf-path=/home/pi/.aria2/aria2.config

设置开机自启

# 重新载入服务，并设置开机启动
sudo systemctl daemon-reload
sudo systemctl enable aria

# 查看aria服务状态
sudo systemctl status aria

# 启动，停止，重启aria服务
sudo systemctl（start、stop、restart） aria

AriaNg http://ariang.mayswind.net/latest

仪表盘

docker

https://hub.docker.com/r/ecat/docker-pi-dashboard

手动安装

安装软件包

sudo apt-get install nginx php7.3-fpm php7.3-cli php7.3-curl php7.3-gd php7.3-cgi

开启系统服务

sudo service nginx restart
sudo service php7.3-fpm restart

浏览器访问http://树莓派ip

修改配置文件

sudo vim /etc/nginx/sites-available/default

location / {
	# First attempt to serve request as file, then
	# as directory, then fall back to displaying a 404.
	try_files $uri $uri/ =404;
}

替换为

location / {
	index  index.html index.htm index.php default.html default.htm default.php;
}
 
location ~\.php$ {
	fastcgi_pass unix:/run/php/php7.3-fpm.sock;
	# fastcgi_pass 127.0.0.1:9000;
	fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
	include fastcgi_params;
}

重启服务sudo service nginx restart

部署项目

sudo git clone https://github.com/nxez/pi-dashboard.git /var/www/html/pi-dashboard

sudo chown -R www-data /var/www/html/pi-dashboard

浏览器访问http://树莓派ip/pi-dashboard

VNC

开启VNC服务

sudo raspi-config

选择Interface Options => VNC，开启VNC服务。

下载VNC客户端

下载地址：realvnc

修改分辨率

如果VNC不能正常访问，可以通过修改树莓派分辨率解决。

sudo raspi-config

选择Display Options => Resolution => Mode4，接着重启机器即可。

Donate me.

• Post author: Sanzo
• Post link: https://sanzo.top/RaspberryPi/raspi-setup/
• Copyright Notice: All articles in this blog are licensed under unless otherwise stated.